eicSys GmbH Embedded Integrated Control Systems

MTCA  Chassis

microtca chassis and full integrated systems

On request the micro tca system could be equiped with a redundant AC power supply.
eicSys GmbH offer customized software/firmware solutions.
Request for a Quote Request for a Quote eicSys GmbH Impressum   AGB Copyright 2015 ATCA advancedtca MTCA microtca PXI pxie pxi express vpx open vpx compactpci compact pci fmc ComExpress network based electronic systems
Designed by  eicSys GmbH
General Description: 6-slot chassis The 6-slot MTCA.4 chassis could be used as laboratory system.  Features: Compliant with MicroTCA.4, R1.0 Spec. Hight 6 U, Depth 375 mm 6 single/double width, mid-size AMC slots 6 RTM slots Airflow bottom /top supports one MCH double/single module - full size cooling unit with IPMI support switched GbE on Ports 0 and 1 switched Fat Pipe direct SATA / SAS-connections direct lines between ports 12 to 15 terminated bussed connections on ports 17 to 20 12-slot chassis The 12-slot MTCA.4 19” rackmount chassis is prepared for controlsystems, as well as for data aquisition. There are 12 slots compliant  with MTCA.4 specification, RTM slots and optional redundant power Features:   Hight: 9 U, Depth 402 mm     optional with DESY LLRF-backplane available     12 single/double mid-size AMC slots     12 uRTM-slots     airflow: bottom/top to rear     supports1, 1,5 oder 2 MCH double/single modules/full size     cooling unit connected to IPMI     switched GbE on Ports 0 and 1     switched fat pipe     direct S-ATA/SAS-connections    direct lines between ports 12 to15     terminated bussed connections between ports 17 to 20
ECH-2S-1U - 1U, 2-slot MTCA.4 system General Description: The 2-slot MTCA.4 DAQ system is ready to be used as data acquisition system. The system is  offered with different sets of boards and test  software package including compiled firmware, Linux drivers and EPICS/DOOCS/GAMMA  interface. There are 2 slots compliant  with  MTCA.4 specification and one AMC 1 single or  double width. Typical application: Beam diagnostic Test equipment Industrial Automation
2 Slot 1U MTCA chassis General Description The 2-slot MTCA.4 1U chassis is ready to use as data acquisition system. The system is prepared with two MTCA.4 AMC slots and 2 MTCA.4 RTM slots. The chassis has a MTCA.0 slot for using a CPU, single width or double width. There is further a management board fixed installed. It is necessary to configure the order code at first for preinstalled PCIe, Timing and/or GBEth management.
MTCA.4 slots: AMC 1 AMC 2 RTM 1 RTM 2 MTCA.0 slot: AMC 3 Crate management: Standard configuration: 1GB Ethernet      PCIe Gen.2 x4 switch      Clock distribution Clock distribution: module support external timing interface (trigger, clock) connected via data lines on ports 17 to 20
6 slot 2U MTCA chassis General Description The 6-slot MTCA.4 2U chassis is ready to use as laboratory evaluation system in case of noiseless fans and flexible fantray configuration. The system is prepared with four MTCA.4 AMC slots and 4 MTCA.4 RTM slots. The chassis has a plugable power supply with 600 watts and could be managed by a plugable MCH like NAT-Phys. The system is also prepared to install a four slot RF backplane behind the MTCA.4 slots. The system has additional two double width, mid size MTCA.0 slots.
MTCA.4 slots: AMC 1 RTM 1 AMC 2 RTM 2 AMC 3 RTM 3 AMC 4 RTM 4 MTCA.0 slot: AMC 5 AMC 6 Crate management: MCH plugable NAT-PHYS Elma MTCA.4 MCH Fan tray: Exchangeable fan cartridge with air flow from front to left or from right to left Power : plugable power supply 600 Watt
Designed by
two fantrays for cooling from: 1. right to left 2. front to left